Faucet is a kind of hardware product often used in life. We must pay attention to the methods for the use of faucet. If there is water leakage in the process of using faucet, it is also very common to solve it in time, so as not to affect the normal life and use of family members. What about the leakage of the faucet? How to use faucet correctly at ordinary times? Let's take a look at these problems.

How to deal with the leakage of faucet

The faucet feels that it is not closed tightly. The water outlet is always dripping. No matter how hard the faucet is tightened, it will still drip. In this case, the faucet can be disassembled, and the plastic gasket inside the faucet can be replaced, so that there will be no water dripping. You can even use the plastic waste at home to cut it into the size of the faucet pipe and replace it.

1. There is water leakage at the valve core of the faucet. It is estimated that the faucet is used too hard or the faucet has been used for too long, which causes the valve core to be loose or separated from the medium at the connection part. At this time, the faucet can only be removed and re installed and tightened.

2. The joint of the faucet pipe leaks water. If the joint of the pipe leaks water, it is usually used for a long time, which causes the nut of the faucet to loosen or rust. Just buy a new one or put an extra gasket to prevent water leakage.

Some friends think that the tighter the faucet after each use of water, the better, think that the faucet will not leak. In fact, this is the wrong way. Usually, we should turn off and turn on the tap gently, and don't knock the tap with a hard object.

1. For the use of the bathtub faucet, the showerhead metal hose should be kept in a natural stretch state. When not in use, do not coil it on the faucet. When in use or not in use, pay attention that the joint between the hose and the valve body should not form a dead angle to avoid breaking or damaging the hose.

2. Regularly clean the surface, reasonably use and regularly clean the faucet can prolong its service life and keep its brightness as new. It is better to clean the surface of the faucet every other month. Usually, clean the surface with clean water, and then dry it with a soft cloth. Once a month, maintain and clean the surface with car wax to keep it bright.

3. Faucet internal cleaning, surface cleaning is for beauty, internal cleaning is the most important factor affecting the service life. If the amount of water in the faucet is reduced or the water is bifurcated, it means that the bubbler of the faucet is blocked. At this time, the bubbler should be removed, soaked in vinegar, cleaned with a small brush or other tools, and then reinstalled.

If there is water leakage from the faucet, it is recommended to find out the cause in time to solve it, so as not to affect the use of your family and add trouble to them. The above is about how to deal with the leakage of the faucet and how to use the faucet correctly at ordinary times. During the process of using the faucet, we should pay attention to the regular cleaning and the correct use method.